Skip to main content

Thrifted Tank Top

It's been really hot some days. I mean like 40degrees (104F) hot.
It's like stepping into an oven. The other day it reached it's hottest in history, a sweltering 46degree celcius (114F) in some place furthest from the sea, west. Needless to say, we stayed inside and I sewed. I ignored the cleaning and I sewed!!! It felt really, really good.

 
I had this size 14 shirt in my stash and I really didn't want to throw it out. I knew I could make something pretty cool from it. It was a nice beige/sandy coloured cotton shirt. So, I turned it into a tank top. I only have two other tanks in my wardrobe and I dislike wearing those tight fitting ones too much. They're kinda unflattering. I'd come across a thrifty tutorial on converting a shirt into a tank. So simple but yeah, it was time consuming as I still had to handle the kids.


 
I laid the shirt out and placed my only other pink tank top over it. Since they weren't that different in size I decided to keep the bottom and only cut out a neckline and arm holes and keeping the shoulders intact.

 I also used the sleeves to make my own binding so I could a binding like this tutorial on Plain Facing. I decided to make single fold binding and I cut out just over 1inch strips, (3.2cms to be exact). I put them through the bias tape maker (after wondering where in the world I stored them), ironed my bias strips and happily started to pin the binding on. The neckline was pretty easy but I found the armholes much harder and had to rip out my stitches a few times.
This is a close-up of the binding. It's about 1.1cm wide. If you used a 12mm already made binding that would be the perfect size. Plus you don't have the hassle of making your own binding if you are time poor or impatient like I usually am.

 I'm quite happy with the result though. I just realised afterwards that I may have still been using my quilting needle instead of a regular cotton needle or universal needle which would have helped me sew the binding on better. Oooops. Better results next time I suppose. I also need to fix that gaping issue. I'm wearing a t-shirt bra and it's making me rather, ummm perky. I wish they had bras that weren't so padded.

 This is the back view of the tank top and below the front half.

I'm hoping to be able to make up a few more of these so I can wear them to work on really scorching hot days. I could even pop a nice cardi over them if it was cooler. I'm so excited. I don't have any other spare shirts but maybe I'll try to make my own tanks.

In other sewing news I finally decided to jump on the Wiksten Tova bandwagon and downloaded the printable pattern. It's just $10 and I hope I can make a few of those as we slowly approach Autumn/Winter.

Now I am quietly waiting for some other fabric mail. It was kinda of a consolation buy as I just had news that my sister has been diagnosed with AML; a type of Leukaemia. Thankfully it is mild and she will start chemo on Monday and we'll be all supporting her as we did with my nephew who just finished his hospital doses and is now on tablet form. I think we have to have these kind of struggles to keep us closer to God and together as a family. 

Wishing you all happy and healthy vibes for this year!

Comments

  1. I hope all goes well with your sister's treatment, chemo is such an awful but necessary journey. I'm sure having her family support her will make it a little bit easier. xx

    ReplyDelete

Post a Comment

Thanks for spending time to make a comment. I will try to respond but I'm very sorry if I do not. XOX

Popular posts from this blog

May SMS Giveaway!

COMMENTS ARE NOW CLOSED! Ok so I'm a day late BUT I'm still in if you're in! I have decided to make a Kristen Doran Sling Bag for the Sew Mama Sew May Giveaway. The trick is that I haven't decided on the material to be used yet and it probably won't be posted until end of next week. All you need to do is leave a comment by the 1st June 2009 (My Birthday!) and I will draw out a winner that evening EST. If you'd like, let me know what kind of colours you might prefer such as cool colours, warm colours or if you're not fussy and would like to be surprised! Good luck!!! International people are welcome. From the Yummy Mummy! Haa haaaa.

Christmas Book Giveaway!

** Giveaway closed ** EDIT: I've linked this up to the Sew Mama Sew Giveaway Day !! Giveaway ends Friday December 13th! When I recieve this box from Scholastic it IS like Christmas Day over and over again! I get so much enjoyment knowing that I'll be recieving quality books that will change my life and my children's lives. I truly believe in their motto: Read Every Day. Lead a Better Life. So true. That's why I've decided to have a book giveaway because they have sent me quite a few and I have to, need to, share the book love. Above is My Merry Christmas by Rosie Smith and Bruce Whatley (sorry if it's blurry). It has lovely illustrations inside and tells a story about what the animals are getting up to during Christmas time.  Here is the book Blossum Possum and the Christmas Quacker by Gina Newton and beautifully illustrated by Christina Booth. Blossum and her friends are desperately trying to wake up Koala Claus and it's a lovely jour

Invisible zipper foot - Birch

I thought I might shed some light on the invisible zipper foot. I bought a Birch model from Spotlight and it came in a little plastic bag with four blue shanks and a rolling foot. First I removed the standard foot from my Janome sewing machine (Sewist 521). I realised I still needed to remove the shank, which is the part that is screwed on, and holds the interchangeable feet. So with one hand holding the screwdriver and one hand holding my daughter, who just had to watch, it popped out disappeared somewhere. NO! I was about to kick myself but luckily I found it in the basket underneath my table. Phew. The Birch invisible zipper foot comes with one shank already in place so you know how it's suppose to fit. You have to select the correct shank that fits your machine and slide it onto the foot piece. I just tried each blue part on my machine and made sure it was wide enough to cover the metal leg bit and that I could fit the screw in it's side. Once you find the correct shank sl